3M Scotch-Brite™ Clean and Strip XT Pro Disc, 4 in x 5/8 in

Legacy 3M Model: XN002039305

Scotch-Brite™ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.

Quickly removes rust, paint, mill scale and coatings from metal

High-strength fiber resists chunking and performs well on edges

High conformability provides a larger contact patch for faster removal rates

Silicon carbide mineral cuts aggressively and leaves a fine finish

Resists loading for consistent cutting action

High speed rating, low vibration and low spark

SKU: 261208,3M Category:
Buy Online

Take Advantage of High Conformability

With its reengineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.

In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.

Spongy Web, Sharp Mineral

To engineer the Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive.

The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.


Rust removal

Paint removal

Mill scale removal

Coating removal

Adhesive removal

Surface preparation

Additional information

Product Color


Abrasive Material

Silicon Carbide


Surface Preparation

Backing Material

Non Pertinent

Backing Thickness (Imp) UOM


Backing Weight

Non Pertinent

Center Hole Dia. (Imp)


Center Hole Dia. (Imp) UOM


Center Hole Dia (Metric)


Center Hole Dia (Metric) UOM


Center Hole Thread Size

Non Pertinent

Disc Type

Non Pertinent


Non Pertinent

Hole Configuration

Non Pertinent



Mesh Size UOM


Micron Grade

Non Pertinent

Number Of Plies


Overall Diameter (Imperial)


Overall Dia. (Imp) UOM


Overall Diameter (Metric)


Overall Dia. (Metric) UOM


Product Category

Non-woven Abrasives

Product Form


Sub Applications

Rust Removal