Skip to main content
ArticlesCovid-19Personal Protective EquipmentRespiratory ProtectionSafe Work Site

3-ply Disposable Medical Mask Made in Singapore

By May 27, 2020January 17th, 2024No Comments
Singapore Made Medical Mask

3-ply Disposable Medical Mask Made in Singapore

  • Registered with Health Science Authority of Singapore
  • High Filtration Efficiency: BFE >99.96% and PFE >99.92%
  • Synthetic Blood Penetration Test: Passed @ 120mmHg
  • Breathability Test (Differential Pressure) : Passed Level 1 Barrier of less than 5mm H2O/cm2
  • Certified for ASTM F2100-19 Level 2 Standard
  • Flammability Test: Passed Class 1 requirement
  • Microbial Cleanliness: below 6 cfu/g
  • Manufactured under ISO 13485:2016 Standard
  • Nose bar adaptable for the perfect fit
  • Low resistance to breathing for daily comfort use
  • Hypoallergenic
  • Peace of mind of getting genuine and tested masks
Disposable Surgical Mask Made in Singapore
Disposable Surgical Mask Made in Singapore

Mask Specifications

Bacteria Filteration Efficiency (BFE): >99.6%
Particle Filtration Efficiency (PFE): >99.2%
Breathability Test (Differential Pressure) : Passed Level 1 Barrier of less than 5mm H2O/cm2
Flammability Test:
Passed Class 1 requirement
Microbial Cleanliness:
<6 cfu/g
ISO 13485 | ASTM F2100-11 Level 2

Material: 3ply of non-woven materials
Dimension: 175mm x 95mm (Adult Size)
Design: Ear Loop
Colour of Mask: Blue
Packaging: 10pcs/pack, 5 packs/box
Expiry Date: 2 years from date of manufacture

 

Test Report by TÃœV SÃœD PSB (Singapore)

Note: These reports are issued subject to the Testing and Certification Regulations of the TÃœV SÃœD Group and the General Terms and Conditions of Business of TÃœV SÃœD PSB Pte Ltd. In addition, this report is governed by the terms set out within these reports.

Contact us to request for the full version of the test report.

How To Determine The Quality Of Disposable Mask?

How to determine the quality of surgical mask

Step-by-step Guide to do a Water Test

Step-by-step Guide to do a Flame Test

Step-by-step Guide to do a Breath Test

How To Put On and Remove Mask Correctly

  1. Clean your hands with soap and water or hand sanitizer before touching the mask.
  2. Hold the mask by ear loops and place the loop around each ear.
  3. Place the mask on your face with the blue side facing out.
  4. Mould and pinch the stiff edge to the shape of your nose.
  5. Make sure the mask is secure. It should cover your nose, mouth and your chin.
    Adjust the mask to your face without leaving gaps on the sides.
  6. In order to remove the mask, do not grab the surface of the mask when disposing of it.
    Please remove a used mask by holding only the ear loops.
  • Change your masks regularly or if soiled or wet.

  • Wash your hands with soap and water or hand sanitizer after disposing of the mask.

Download Brochure

Enquire Now